Larken 20-20 X is changing between cuts.


Results 1 to 3 of 3

Thread: Larken 20-20 X is changing between cuts.

  1. #1
    Registered
    Join Date
    Dec 2012
    Location
    Canada
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Larken 20-20 X is changing between cuts.

    We have a Larken 20-20 that is not positioning itself in the correct X position for subsequent cuts. Proportions of the cuts are fine, but it is mis-aligning, for instance, the first and second 1/16" depth cutting passes.
    Also, when cutting letters, it may cut the second letter too near or on top of the first letter.
    We are using mastercam x6 and starcnc usb 3.04

    Any help would be appreciated.

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2007
    Location
    canada
    Posts
    962
    Downloads
    0
    Uploads
    0

    Default

    I had a problem with some of the controller chips in the USB controller. I switched from the 18F452 to a 18F45K22 and there was a bug that crept in.
    Send me an email , and i will send out a new chip.

    Larry

    Manufacturer of CNC routers and Viper Servo Drives
    www.LarkenCNC.com and www.Viperservo.com


  3. #3
    Registered
    Join Date
    Dec 2012
    Location
    Canada
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    I have received the new controller chip and will be installing it before the weekend.
    I'll keep you posted as to how it goes.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Larken 20-20  X is changing between cuts.

Larken 20-20  X is changing between cuts.