Larken 2424 Camtool Spindle RPM problem


Results 1 to 2 of 2

Thread: Larken 2424 Camtool Spindle RPM problem

  1. #1
    Registered
    Join Date
    Oct 2012
    Location
    USA
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Larken 2424 Camtool Spindle RPM problem

    Any help would be appreciated!!

    We have a Larken Camtool 2424 with a 3HP ELTE Spindle:

    Problem:
    Spindle will not accelerate to correct RPM to drill/cut certain metals (stainless steele/aluminum).

    Any suggestions on what issue may be?

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2007
    Location
    canada
    Posts
    962
    Downloads
    0
    Uploads
    0

    Default

    Download the AC-tech MC1000 manual, and set the RPM to be controlled by the Keypad.
    Does the router start from the starcams Start router button?

    Larry

    Manufacturer of CNC routers and Viper Servo Drives
    www.LarkenCNC.com and www.Viperservo.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Larken 2424 Camtool Spindle RPM problem

Larken 2424 Camtool Spindle RPM problem