Download the AC-tech MC1000 manual, and set the RPM to be controlled by the Keypad.
Does the router start from the starcams Start router button?
Larry
Any help would be appreciated!!
We have a Larken Camtool 2424 with a 3HP ELTE Spindle:
Problem:
Spindle will not accelerate to correct RPM to drill/cut certain metals (stainless steele/aluminum).
Any suggestions on what issue may be?
Similar Threads:
Download the AC-tech MC1000 manual, and set the RPM to be controlled by the Keypad.
Does the router start from the starcams Start router button?
Larry
Manufacturer of CNC routers and Viper Servo Drives
www.LarkenCNC.com and www.Viperservo.com