Problem chatter from cutting x - y axis


Results 1 to 2 of 2

Thread: chatter from cutting x - y axis

  1. #1
    Registered
    Join Date
    Aug 2006
    Location
    USA
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default chatter from cutting x - y axis

    I have a Larken System 600LS with dual lead screws. I'm getting chatter mostly when cutting circles and some angles. Cirtain places seem to be worse than others. I do mostly 2D cutting and it doesn't seam to matter if it is 1/4", 1/2" or 3/4" material. I cut plywood and MDF. Is this an issue from the lead screw nuts, drive motors or controller?

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2007
    Location
    canada
    Posts
    962
    Downloads
    0
    Uploads
    0

    Default

    We had some problems with the Kerk nuts loosing the tension spring and having backlash on those machines. Kerk makes a better nut now, but its a lot of work to change to the new one. It need to be machined in.

    Which controller is on the machine ?

    Larry

    Manufacturer of CNC routers and Viper Servo Drives
    www.LarkenCNC.com and www.Viperservo.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

chatter from cutting x - y axis

chatter from cutting x - y axis