Looking for any information from the forum members on a 1986 Pratt & Whitney Beaver VC5. 30" x14" X 6" w/12atc. It has A Fanuc OM controller and Siemens drives. Machine was purchased a while ago have been getting some limited use from the machine by punching in Gcode. Would like to tie into a PC to dnc/dripfeed. Don't have any information on the machine. Have original copy of parameters with the machine but that is it. I have lots of Cad experience but no cam. Have been playing around with some of the freeware/demo programs like gsimple/etc. I have had no luck getting machine to communicate with Pc. I have made the crossover DB25 cord. If any one could help me out with any information or leads on info that would be great. If any one has a manual for the fanuc OM on Pdf or what ever that i could get a copy of that would be great.
Thanks in Advance