Need Help! Lagun FT-1 Vertical Turret Ram Knee Mill ????

Results 1 to 2 of 2

Thread: Lagun FT-1 Vertical Turret Ram Knee Mill ????

  1. #1
    Member
    Join Date
    Jun 2012
    Location
    USA
    Posts
    18
    Downloads
    4
    Uploads
    0

    Default Lagun FT-1 Vertical Turret Ram Knee Mill ????

    I have acquired a bit of a Frankenstein machine.
    I believe it's an early model Lagun with a Bridgeport Variable speed J -head.
    The question is regarding the serial number.....
    Mine is 4 digits. Everyone else's seems to be 5.....
    Any help identifying the base so I can start looking for the correct manual would be helpful.
    I did decide this must be a FT-1 based on the length of the bed. It's the only thing it could be.
    But there are a couple subtle differences in the drawings, anx I've looked all over for one with similar badging with no luck...
    My name placard logo thing on the side of the ram is different from any lagun I've found anywhere.
    Will try and figure out how to post pictures....

    Similar Threads:


  2. #2
    Member
    Join Date
    Jun 2012
    Location
    USA
    Posts
    18
    Downloads
    4
    Uploads
    0

    Default Re: Lagun FT-1 Vertical Turret Ram Knee Mill ????

    Serial number on the y-axis reads:
    SE-4526



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Lagun FT-1 Vertical Turret Ram Knee Mill ????

Lagun FT-1 Vertical Turret Ram Knee Mill ????