Need Help! Kitamura HX300, 1999, Fanuc 16, Palet alarm 2014


Results 1 to 2 of 2

Thread: Kitamura HX300, 1999, Fanuc 16, Palet alarm 2014

  1. #1
    Member
    Join Date
    May 2010
    Location
    Russia
    Posts
    218
    Downloads
    0
    Uploads
    0

    Default Kitamura HX300, 1999, Fanuc 16, Palet alarm 2014

    Hi!
    After the fuse in operator panel next alarm appeas.
    The machine alarm in "14" - looks like switched.
    Any ideas?

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Kitamura HX300, 1999, Fanuc 16, Palet alarm 2014-img_2890-jpg  


  2. #2
    Member
    Join Date
    May 2010
    Location
    Russia
    Posts
    218
    Downloads
    0
    Uploads
    0

    Default Re: Kitamura HX300, 1999, Fanuc 16, Palet alarm 2014

    The problem was in air sensor.
    This sensor is under the pullet.
    It inform about air pressure change (the diff from low to high pressure till 1 Atmosfere)
    I blocked this sensor and connected the chain to other sensor: the pallet on(off).
    2014 error disappeared.



  3. #3
    Kihieu's Avatar
    Join Date
    Sep 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Kitamura HX300, 1999, Fanuc 16, Palet alarm 2014

    I can't find sensor



  4. #4
    Kihieu's Avatar
    Join Date
    Sep 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Kitamura HX300, 1999, Fanuc 16, Palet alarm 2014

    Please help me to fix the error



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Kitamura HX300, 1999, Fanuc 16, Palet alarm 2014

Kitamura HX300, 1999, Fanuc 16, Palet alarm 2014