Solved OIL COOLER FLOW ALARM 2031


Results 1 to 1 of 1

Thread: OIL COOLER FLOW ALARM 2031

  1. #1
    Member
    Join Date
    May 2010
    Location
    Russia
    Posts
    218
    Downloads
    0
    Uploads
    0

    Default OIL COOLER FLOW ALARM 2031

    The problem was in fuse +24V in operator panel.
    In photo you will see the panel. Screw 16 pcs from back side and in right bottom corner there is fuse in input board 2A.
    this fuse was broken and none key was active in operator panel.
    The message alarm "OIL COOLER FLOW ALARM 2031" was only the FIRST error in table of errors and we can see only one alarm at once.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails OIL COOLER FLOW ALARM 2031-img_0607-jpg   OIL COOLER FLOW ALARM 2031-img_2887-01-jpg   OIL COOLER FLOW ALARM 2031-img_2889-jpg  
    Last edited by =aike=; 03-11-2017 at 02:04 AM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

OIL COOLER FLOW ALARM 2031

OIL COOLER FLOW ALARM 2031