Inputting Parameters


Results 1 to 2 of 2

Thread: Inputting Parameters

  1. #1
    Registered
    Join Date
    Aug 2013
    Posts
    89
    Downloads
    0
    Uploads
    0

    Default Inputting Parameters

    I have a Kitamura MC 1 with a Fanuc OM-B control I have a 911 alarm RAM PARITY (HIGH)
    From what I have come up with the batteries have died and I need to delete the system and re enter the parameters I have found instructions on how to do that but I can not figure out how to enter a non number ?
    this is a new machine to me and I am new to the cnc machining as well

    I understand I need to enter the 900's first ?
    here is an example;
    N900 ..111.11
    N901 .1..1...
    N902 111.....

    The N I am assuming represents number ? or does that need to be entered as well ?
    I have the parameters on paper and also have a PITCH ERROR settings
    What are the pitch error settings ? I have not seen reference to that before.

    I am in the D/FW Area and would gladly pay for help on getting my machine running.

    Thanks

    Similar Threads:


  2. #2
    Registered
    Join Date
    Aug 2013
    Posts
    89
    Downloads
    0
    Uploads
    0

    Default Re: Inputting Parameters

    Inputting Parameters-055-jpgInputting Parameters-057-jpgInputting Parameters-058-jpgInputting Parameters-063-jpg
    Here are some pics of what I have


    I have tried to clear the machine by pressing Delete and Reset at the same time while powering up but nothing changed ?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Inputting Parameters

Inputting Parameters