PLEASE HELP KIT MC1 OM B


Results 1 to 6 of 6

Thread: PLEASE HELP KIT MC1 OM B

  1. #1
    Registered
    Join Date
    Aug 2013
    Posts
    89
    Downloads
    0
    Uploads
    0

    Default PLEASE HELP KIT MC1 OM B

    Got my machine inside cleaned up hooked up power and air. Powered it up screen comes on and I had an Alarm 531 -Z axis limit switch so I cleared that up (switch was stuck) and tried it again. I can not get any axis to move in any direction. Well I think I may have found the problem,however I hope that I am wrong. After studying the manuals it appears I may be missing a few boards in the cabinet I have some pics for y'all to look at to confirm this for me
    It seems that I need an Axis board an MPG/CRT board and maybe some memory too ?

    PLEASE HELP KIT MC1 OM B-001-jpgPLEASE HELP KIT MC1 OM B-002-jpgPLEASE HELP KIT MC1 OM B-003-jpgPLEASE HELP KIT MC1 OM B-004-jpg



  2. #2
    Banned metalcutting's Avatar
    Join Date
    Dec 2013
    Posts
    39
    Downloads
    0
    Uploads
    0

    Default Re: PLEASE HELP KIT MC1 OM B

    hold can+p while power up the machine , Your machine is in Soft limit
    than move axis



  3. #3
    Registered
    Join Date
    Aug 2013
    Posts
    89
    Downloads
    0
    Uploads
    0

    Default Re: PLEASE HELP KIT MC1 OM B

    Quote Originally Posted by metalcutting View Post
    hold can+p while power up the machine , Your machine is in Soft limit
    than move axis
    Thanks I have done that it did clear the Alarm code but still no Axis movement ? Thanks



  4. #4
    Banned metalcutting's Avatar
    Join Date
    Dec 2013
    Posts
    39
    Downloads
    0
    Uploads
    0

    Default Re: PLEASE HELP KIT MC1 OM B

    After power up you use Handle / MPG towards negative direction to axis movement First
    Or do Grid Shift arrangement as :
    https://quantumautomation.wordpress....ft-adjustment/



  5. #5
    Registered
    Join Date
    May 2011
    Location
    USA
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: PLEASE HELP KIT MC1 OM B

    2nd LS switch?



  6. #6
    Registered
    Join Date
    Aug 2013
    Posts
    89
    Downloads
    0
    Uploads
    0

    Default Re: PLEASE HELP KIT MC1 OM B

    Got my machine running had a local tech come out lucky for me he new my brother inlaw and gave me a really good deal on helping me get it up and running. I was close but would probably never have got it going with out him I also learned a whole lot I can now read the ladders and trouble shoot problems can not say enough the guy was really great !!!!
    I have not cut any parts yet maybe next week my son will be home from school and we are going to learn it together will start out with some styrofoam to get started and go from there.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

PLEASE HELP KIT MC1 OM B

PLEASE HELP KIT MC1 OM B