- Need Help!- 300 H with 6m failed MDI command
-
Registered
300 H with 6m failed MDI command
I have a 6M control and every time I input an MDI command to rotate he B axis the display puts a PERIOD before the letter B and the number of degrees I entered after the B. I also input a G0 command.Hitting the either Start button causes the display to clear but no axis motion takes place. I have to hit reset to be able to try again. All other axis or spindle commands work. I have tried to rotate the B axis in both absolute and incremental mode to no avail. THANX Steve
Similar Threads:
-
- Need Help!- 300 H with 6m failed MDI command
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules