Kitamura mycenter2 cutting @ angle in x axis

[new2kit]

My Kitamura CNC Mill is cutting @ an angle about .005 in .375 of length.

I'm not very familiar with the machine, but on my wire edm I have an option for K rotation. Just wondering if there is a rotation code (switch) I could check that may be on for the Kitamura causing it to cut at an angle.

[CNCRim]

Have you try slap on an indicator and indicate the table to see if it is square?

[new2kit]

Originally Posted by CNCRim Have you try slap on an indicator and indicate the table to see if it is square?

Yes, I ran an indicator across my set up block that holds my electrode while machining and it indicates good, but when I make a cut I'm getting about .004-.005 difference in about .375 distance. Wierd...........

[new2kit]

Problem solved, just wanted to let others know. Our R rotation (under G54,G55... x,y,z,r area) had a value keyed into it by mistake.
Changed R to R0 and we are cutting in a straight line again.