Post your file here so we can look at it.
Hi to all,
I'm a newbie.I'm trayn some software and I have some problem with this 2 program.So I drawing a circe in autocad-> export in dxf format->open Deskam2000->Choise Contour->save toolpath cnc->open Kcam->Open file(circle.gc) and I found a line!?
sorry for my English
(Created 11.00.11 09-10-2003 from cerchio)
(Post = ISO G-Code (Non Modal))
(Tool 0 = None)
N0000 T0 M06
N0001 G00 X0.0000 Y0.0000 Z0.0000
N0002 G00 X21.5000 Y0.0000 Z0.0000
N0003 G01 X21.5000 Y0.0000 Z-1.0000 F2000.00
N0004 G03 X21.5000 Y0.0000 I-21.5000 J0.0000
N0005 G00 X21.5000 Y0.0000 Z0.0000
Looks like line N0004 is producing the arc.
N0002 = position the tool at right side of arc, centered on Y
N0003 set Z depth
N0004 mill arc
N0005 return Z
San Diego, Ca
___ o o o_
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
but the code that I wrote it is a deskam2000' s elaboration.
So I think that, at this poit, could be a bug!
What do you think?
KCam 4.0.8 just came out. It will open a DXF circle created with DesKam