Please a need an information - CNCzone.com-The Largest Machinist Community on the net!

giansa · #1 10-09-2003, 03:49 AM

Hi to all,
I'm a newbie.I'm trayn some software and I have some problem with this 2 program.So I drawing a circe in autocad-> export in dxf format->open Deskam2000->Choise Contour->save toolpath cnc->open Kcam->Open file(circle.gc) and I found a line!?
Why?
Giansa
sorry for my English

CNCadmin · #2 10-09-2003, 07:51 AM

Post your file here so we can look at it.

giansa · #3 10-09-2003, 09:53 AM

(Created 11.00.11 09-10-2003 from cerchio)
(Post = ISO G-Code (Non Modal))
(Tool 0 = None)
N0000 T0 M06
N0001 G00 X0.0000 Y0.0000 Z0.0000
N0002 G00 X21.5000 Y0.0000 Z0.0000
N0003 G01 X21.5000 Y0.0000 Z-1.0000 F2000.00
N0004 G03 X21.5000 Y0.0000 I-21.5000 J0.0000
N0005 G00 X21.5000 Y0.0000 Z0.0000
M02

THX

Rekd · #4 10-09-2003, 10:38 AM

Looks like line N0004 is producing the arc.

N0002 = position the tool at right side of arc, centered on Y
N0003 set Z depth
N0004 mill arc
N0005 return Z

'Rekd

giansa · #5 10-09-2003, 03:01 PM

Ok,
but the code that I wrote it is a deskam2000' s elaboration.
So I think that, at this poit, could be a bug!
What do you think?
Thx
Giansa

Johngil · #6 11-26-2003, 05:24 AM

KCam 4.0.8 just came out. It will open a DXF circle created with DesKam

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CNC Glossary	CNCadmin	CNCzone Club House	17	03-09-2008 04:08 PM
Need Information About Used Steppers	Mr.Chips	Stepper Motors and Drives	5	11-17-2005 02:53 PM
Need detailed information for system variables on Fanuc0m control?	Alf012	General CNC (Mill and Lathe) Control Software (NC)	4	03-03-2005 01:52 PM
Threading information	M@T	General Metal Working Machines	2	06-10-2004 09:47 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)