Results 1 to 4 of 4

Thread: KCam Tutorial?

  1. #1
    Registered
    Join Date
    Sep 2005
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default KCam Tutorial?

    Is anybody know if there is a tutorial for KCam and where to find it?
    Thanks

    Similar Threads:


  2. #2
    Gold Member dertsap's Avatar
    Join Date
    Oct 2005
    Location
    canada
    Posts
    4003
    Downloads
    0
    Uploads
    0

    Default

    kcam site has information on how to it setup



  3. #3
    Registered
    Join Date
    Jan 2008
    Location
    USA
    Posts
    240
    Downloads
    0
    Uploads
    0

    Default

    There is a user .pdf manual here http://www.kellyware.com/download/index.htm

    Also you can go to stepper world for the port settings here http://www.stepperworld.com/pgSoftware.htm about 1/2 way down the page.

    Hope this helps.



  4. #4
    Registered
    Join Date
    Oct 2009
    Location
    Phil
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default Hi.

    Excuse me, is there any quick way to convert .plt files to .tap or .gc?



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed