Kcam not cutting arc's


Results 1 to 3 of 3

Thread: Kcam not cutting arc's

  1. #1
    Member
    Join Date
    Jul 2003
    Location
    qld australia
    Posts
    74
    Downloads
    0
    Uploads
    0

    Default Kcam not cutting arc's

    Hi
    I have just started to play around with Kcam and use autocad to do my drawings, when importing DXF Kcam will not cut the arc's just does a line is there anything I have to do to get the arc's cut either in Kcam setup or Autocad

    thanx John

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jun 2012
    Location
    Venezuela
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default R12 DXF

    Try using Acad drawing and save as an R12 DXF file.



  3. #3
    Registered
    Join Date
    Jun 2013
    Location
    United States of America
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default

    I have the same problem, but use Turbo Cad 18 Platinum, I don't know how to save in R12 DXF.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Kcam not cutting arc's

Kcam not cutting arc's