Vaccum Table for Joe's 2006

[robertmonroe]

I'm fabricating a vacuum table for my Joe's 2006. I'll use MDF for the first trial and when it wears out I'll replace it with an HDPE one.

Im going to drill through the actual table of the router to mount the Vacuum Table and to pass through the vacuum hoses down through the top of the table and out the back.

I'm made a demo video of the V Carve project and will host it on Rapidshare so anyone can download it and watch it. The file is an mp4 which will play with quicktime or windows media player, I think it views better in quicktime.

The link for the VCarve Pro 5 file:

http://rapidshare.com/files/230473186/vacuum_table.crv

The Link for the Mach3 file:

http://rapidshare.com/files/23047316...ccum-table.txt

The Link for the V Carve Demo video:

http://rapidshare.com/files/23047394..._Carve_Pro.mp4

You don't need to have a Rapidshare account to download the files just choose the free download option.

Enjoy.

Courtesy of Robert Monroe Turner

[BobF]

Here is a little tutorial from a shopbot member who build a Vac-System, Kind of a Step by Step.

http://shopbotwiki.pbwiki.com/Build-your-own-vac-system