Bearing Bracket pics?

[TchTchr]

Does anyone have pics of the assembling of the bearing brackets? I've looked at many many pics on here and can't seem to get the combination of bolts, lock washers and nuts in the right sequence. I've downloaded assembly instructions from here, but nothing makes sense. The shank of the 5/16" X 1 1/2" bolt gets in the way of the easiest assembly. I'm stumped and could spend all night looking for pictures. Any help would greatly be appreciated.

Thanks,
Brad
Newburgh, IN

[BobF]

Originally Posted by TchTchr Does anyone have pics of the assembling of the bearing brackets? I've looked at many many pics on here and can't seem to get the combination of bolts, lock washers and nuts in the right sequence. I've downloaded assembly instructions from here, but nothing makes sense. The shank of the 5/16" X 1 1/2" bolt gets in the way of the easiest assembly. I'm stumped and could spend all night looking for pictures. Any help would greatly be appreciated. Thanks, Brad Newburgh, IN

Brad,
You need bolts with thread all the way down the bolt for these. Joe used nuts as spacers for these and you have to be able to tighten a nut on just the angle.

[TchTchr]

Thanks Bob.