| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
03-09-2009, 07:07 PM
| |||
| |||
Just something to keep the 2 1/2 hp route from dancing all over the place, a versatile mount for other gadgets, and a movable dust collector. Got the bearing dirt cheap on eBay and a 1/2 X 8 X 78 alum bar was $70 at the local supplier (and there is plenty of it leftover). I figured that if I have a machine that can carve, let it carve some parts for itself first.  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
