A video on you tube of the build so far
Good start, Nice to have a machine to cut the parts out with, One machine building a another machine
should get my gecko 540 and 3 axis bipolar motors today , when i do ill take some pictures and post
Woo, if you don't mind, be very thorough with the electronics part (pictures and all), I'm going to get into that in few weeks and I'm a bit terrified, lol I'm going with G540 and Keling's as well.
Don't forget to heatsink the G540, there have been issuse's on the larger amp motors and Gecko just did testing on this issue this week and posted a writeup.
geckodrive doesnt sell a heatsink for the 540 where could i get one that would mount to it easy
In his experiment he did not find any difference using a heatsink and using a 120mm fan blowing on it. or use a computer heatsink with fan attached to it, and use adhesive thermo.
I ordered a 120mm 48 volt dc fan to put on my gecko and also got my router and new computer case in today . I will have pictures of the router bed today. I also should have almost everything glued and ready for paint by friday.