WTD: nested parts for Joes 2006 R2

[zachjowi]

Does anyone have the parts nested on 4'x8' sheets already or anyother sizes of stock? It would be great if you did and shared it.

Thanks

[joecnc2006]

I have this one of the 1/2" MDF material, but it is missing the two gantry bottom torsion box long runs, which you can add.

Joe


http://www.cnczone.com/forums/attach...1&d=1204574654
R2 nested.jpg

[zachjowi]

I have this one of the 1/2" MDF material, but it is missing the two gantry bottom torsion box long runs, which you can add.

Joe


http://www.cnczone.com/forums/attach...1&d=1204574654
R2 nested.jpg

thank you. You are a good man

[agguilar]

thank you joe