| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-14-2008, 09:42 PM
| ||||
| ||||
I see that most of these are using 200 - 300 oz steppers.. Should I be ok using 700oz that I had from another project.. Or will they tear this machine apart? Thanks Paul
__________________ If you have and don't use it, you still have it.  |
|
#2
01-14-2008, 10:46 PM
| ||||
| ||||
| you can use them, Jay used 640oz/in and gecko's. you just set the speeds accordingly, and make sure you definitely use limit switches. Joe |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Stepper Motor Sizing | itsme | Mini Lathe | 0 | 12-12-2006 04:05 PM |
| Sizing Criteria for Torque of Stepper motor | dscamero | Stepper Motors and Drives | 1 | 02-19-2006 04:13 PM |
| Stepper sizing | callcbm | Stepper Motors and Drives | 0 | 12-25-2005 03:47 PM |
| Help with motor sizing | flinty | Servo Motors and Drives | 5 | 02-08-2005 03:44 AM |
| | |
Linear Mode
