Another Joe in GA

[BobF]

Here are the pictures of my dust collector from another thread. It includes the other correct picture, instead of the one of the old one that is above.
super deluxe dust collector that actually works?

[BobF]

Here is a little tutorial from a shopbot member who build a Vac-System, Kind of a Step by Step. Would be interesting to see one done on the on the 2006. I may try this at some point.

http://shopbotwiki.pbwiki.com/Build-your-own-vac-system

robertmonroe is building one for his here.
Vaccum Table for Joe's 2006

[BobF]

Here is the current reduction fix that Gary worked out.
I have read elsewhere that this works well. I plan to do this mod next time I pull down the controller. I said this a while back and still have not done it. Several others have and report good results.
I am posting some of these for the benefit of others and also as a way to record them for myself so I wont loose track later.

Current Reduction, HobbyCNC - Mach3