Joe's CNC 4x4 Hybrid

[MyCattMaxx]

I like the custom made room for the maachine (lol) But not much room to finish the walls.
I hope your in a warm climate.

[joecnc2006]

Originally Posted by MyCattMaxx I like the custom made room for the maachine (lol) But not much room to finish the walls. I hope your in a warm climate.

I'm in texas, that will be my CNC Shop, 10'x20' building.

[eloid]

Originally Posted by Hdale85 Hey Joe, does he have a build thread of this on your forum? Be nice as I'd like to take this approach to get the extra storage and what not on the bottom.

where can we find this thread for" kent machine" i seen a picture of it once with the lathe... but dont remeber where is there a build thread of it?

[P.Passuello]

Originally Posted by eloid where can we find this thread for" kent machine" i seen a picture of it once with the lathe... but dont remeber where is there a build thread of it?

Kent's build log is on Joe's own website along with many other 4x4 hybrid build logs.

Cheers
Peter

[joecnc2006]

Here is a picture of the Rack and Pinion machine with the Bed layout and T-tracks, I used the 80/20 for the tracks.

[rbartko]

That's beautiful Joe. How bout some shots of the rack & pinion setup?

Thanks, Rich

[joecnc2006]

Running the breaking wizard.

Speed 800
Rapids 1200

YouTube- Joe's CNC 4x4 Hybrid R&P Breakin

YouTube- Joe's CNC 4x4 Hybrid R&P Breakin

[dan j]

Can someone help me find a thread/post on squaring everything up (gantry, axises, router, limit and homing switches)?

Thank you,
Dan

[RAYMOND12]

Hi Joe
I'm in France and would like to build such a machine. As you know, we are using metric and I'm not sure to find all the materials listed in your BOM. Before to buy your plans, I wanted to know if it does exist a community in your forum that is able to provide support to build a european version of your machine.
Thanks,
RAYMOND

[joecnc2006]

Originally Posted by RAYMOND12 Hi Joe I'm in France and would like to build such a machine. As you know, we are using metric and I'm not sure to find all the materials listed in your BOM. Before to buy your plans, I wanted to know if it does exist a community in your forum that is able to provide support to build a european version of your machine. Thanks, RAYMOND

This is the closest members we have to you.

[joecnc2006]

Got the Bed Bolted down and the 80/20 T-Track system screwed down, just need to surface the table now, and ready to start cutting when this one is running with out any hick ups time to disassemble the original machine.

[joecnc2006]

Here is a Video a Paul Made he just finished his second machine which was the Rack and pinion machine.

This shows both machines running as a comparison.

YouTube- R&P vs Lead Screws

YouTube- R&P vs Lead Screws