Joe's CNC Model 2006

[coltey]

Joe, I have read all 44 pages and have come to the conclusion that you are a "one in a million" type person because of your efforts and willingness to help everyone. You and all of the other users that have contributed to this thread of "Joe's CNC model 2006" have inspired me to participate in creating a CNC wood router. I would like a quote for your kit and I have a few questions to ask you as well so I think I will put it all together in an email and send it off to you. I just want to say, Thanks...

[David Da Costa]

Joe, did you do any prep to the gas pipes (cleaning , sanding etc).

Thanks

David

[joecnc2006]

Originally Posted by David Da Costa Joe, did you do any prep to the gas pipes (cleaning , sanding etc). Thanks David

i lightly sanded them, just to make them smooth.

joe

[joecnc2006]

Thought I would post picture of my Small (but efficent to me) Work Area.

[bp092]

Originally Posted by joe2000che Thought I would post picture of my Small (but efficent to me) Work Area.

lol, look at the bright side, it isn't exactly a bad thing going to do the laundry, because well, atleast you have something to kill time with How many kits have you cut so far? Keep up the good work man!

[David Da Costa]

Very neat Joe, but why is'nt it cutting

What dust extraction system are you using?

[PaulH]

Joe, you own the same Bostitch air compressor that I have. I really like it compared to most of the other "pancake" style compressors that I have used. The induction motor weighs a ton, but it keeps up with just about everything that I can throw at it!

One of these days, when I clean up my workshop, I'll post a picture of it.

David, the dust collector in Joe's picture is a Delta AP400. Here's the site: http://www.deltamachinery.com/index.asp?e=136&p=852

[bp092]

Yeah bostich makes pretty good solid products, I have both bostich and porter cable nailers and the bostich is up there with performance, I'm sure their compressors are the same. Same on the delta dust collector, I just have to switch from PVC to Metal hvac because I'm losing a ton of suction with my blast gates and so many ports and tons of static build up. Joe do you pretty much get everything with that dust collector? I would imagine since it's directly ported that it shouldn't put any fibers into the air. Down the road I will probably buy a dust collection adapter as well

[joecnc2006]

this is what i am using now with the Delta...

Post #14 to start

http://www.cnczone.com/forums/showthread.php?t=27189

[joecnc2006]

Well Been busy, and with the thanksgiving holiday it slowed down the cutting of kit, but I will be shipping out tommarrow, and send e-mail to those who i am sending to.

For those who are not ready or my machine is to much to tackel for them right now, LIONCLAW is offering a kit now which may work for you better at this time, please look at his machine, and he also made a online store to order from, here is his link to his plog. Stop by there if you have not already and check it out.

Some may ask why would you post about another machine that is offered as a kit?

Well to me it is simple this is a hobby for me and this forum has offered so much to everyone, I just want everyone to have the best advantage available to them to be able to build a machine and experiance to joy i have in this hobby.

http://www.cnczone.com/forums/showthread.php?t=14331

Thanks, Joe

[bp092]

thanks Joe, I have confidence in you, I know you're working as hard as you can.. I will enjoy your build though and hopefully all of these build logs, photos and vids are making you smile, as in that all the hard work has paid off

[David Da Costa]

ditto that