| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-14-2011, 09:28 PM
| |||
| |||
Thanks Don for the directions, My problem is I have a kellings spindle and controller k-1500vdf which i have just fitted to my cnc router Kellings e-mailed me a manual for the controller but I must be a bit thick from the manual I can't work out the program sequence of the buttons I have manage to enter the recommend parameters from kellings but can't get the spindle to run. I have only two cables wired in the 230v on the rst and the out put to the spindle are there any other cables needed to be wired in? Thanks Cairo2nz  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- Kelings Kl-vdf spindle controller | cairo2nz | Plasma, EDM and other similar machine Project Log | 2 | 09-29-2011 03:43 PM |
| Spindle controller | Mastiffman | Want To Buy...Need help! | 0 | 02-28-2010 06:06 PM |
| Spindle controller? | cncmadman | Daewoo/Doosan | 1 | 03-22-2008 08:35 PM |
| Spindle Controller | xitian | General Electronics Discussion | 1 | 06-04-2007 11:40 PM |
| controller for spindle so it can tap | ZipSnipe | Mechanical Calculations/Engineering Design | 6 | 11-26-2006 10:24 PM |
| | |
Linear Mode
