High Density Polyethylene (HDPE) Sheeting | U.S. Plastic Corp.
I hate finding some answeres after I post a question.
Im looking for a source to build my Joes 2006 Skin out of HDPE.
+2 for US Plastics.
Good straight material also, purchased similar from Enco on two occasions, cut crooked, warped and twisted, for small parts that is not an issue but can be.
I fabricate molds using 1/2" and 3/4" HDPE and Polypropylene so I may have material. I am in the Austin, TX area