Newbie- joe cnc 2006 full mdf parts layout in DXF

[Momentz]

Hi
Does anyone have a full mdf parts layout in DXF format, like all the parts layed out on one sheet so i can take it to my local CNC guy and just say cut that out, instead of giving him 45 files and say can i have 2 of that one 6 of that etc etc. i found one for the HDPE parts but cant find one for just the rest of the machine
thanks in advance
Chris

[whackit]

here's a nested layout of the MDF parts

http://www.cnczone.com/forums/483435-post1.html

http://www.cnczone.com/forums/489241-post7.html

can you please share where you found the layouts for the HDPE parts?

[gully]

Hi Momentz,
A word of caution.
Just make sure before you have some one cut from the files that they are not for imperial sheets sizes and thicknesses.
MDF in Australia is all in Metric sizes
You may be very disappointed in the fit of the parts.

Gully

[sli21]

hi chris
are u able to share the dxf file(s) for the hdpe parts? cheers and thanx
scott

[jalessi]

Sli21,

Hope this helps,

Jeff...