I am finally near completion of my Joes 2006. I need some advise on what else I am going to need to get started. I have all of electronics, computers
I don't know much about router bits, brands, ect. I also need to know which bits i should get. I will be working on plexi, wood, and foam. If you know of a website to get them from that would be great.
i already got a pendant. I bought one of the shuttle pro 2.
I need a zero setter. I thought I saw one on here awhile ago.
If you can think of anything else thanks.
There are a lot variables involved here. I would start with these (I just found but lost the thread they're from):
(don't go below 1/8" diameter on these, you'll probably have breakage problems if you do....)
There are a lot of threads on what type of cutting tool to use for a given situation.
Hope this helps....
Thanks, what are you using for a zero setter.
Congrats on completing your build, it is a moment of great satisfaction to watch the machine cut something you design on the computer, even after months of watching it do this