I've had my Hybrid running for about 7 years and it has been my second most used tool in the shop. The 3d printers are my most used tool in case you were wondering. I've been very happy with the hybrid. It's done everything from big 3/4" MDF sheet to engraving and drilling printed circuit boards. I decided to give the old guy a few upgrades...

I made some upgrades to my hybrid. I upgraded my Y steppers to Nema 34 960 oz-in steppers. I also replaced the HDPE leadscrew boxes for the Y and A with steel square tube. I'm also planning to upgrade the X with Nema 34 and steel square tube. I also designed and built a racking detector (thanks to Kent for the driver circuit and input). This will estop mach 3 if the Y and A gantry screws get out of sync. This is to prevent damage to the machine. Yes it has happened to me...

Here are some pictures and some video...Please excuse the messy surface.



Joe's Hybrid - Xnaron's Build-20160512_131249-jpg

Joe's Hybrid - Xnaron's Build-20160508_150531-jpg

Joe's Hybrid - Xnaron's Build-20160512_185040-jpg

Joe's Hybrid - Xnaron's Build-20160512_185046-jpg

Joe's Hybrid - Xnaron's Build-20160512_185058-jpg

Joe's Hybrid - Xnaron's Build-20160512_185102-jpg