Completed Work Pieces


Page 1 of 4 1234 LastLast
Results 1 to 20 of 79

Thread: Completed Work Pieces

  1. #1
    www.joescnc.com joecnc2006's Avatar
    Join Date
    Aug 2004
    Location
    usa
    Posts
    3215
    Downloads
    2
    Uploads
    0

    Default Completed Work Pieces

    Thought it would be fun to see what people have made on the CNC Model 2006.

    So we can have one place to look at the fine work pieces.

    Here is a kick off of a couple i have done. (names have been removed in pieces to protect the innocent)... lol

    Joe

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Completed Work Pieces-corian-jpg   Completed Work Pieces-surveyor-seal-16in-final-post-jpg   Completed Work Pieces-eng-seal-16in-final-post-jpg   Completed Work Pieces-dscf0898-jpg  

    Last edited by joecnc2006; 06-25-2007 at 09:46 PM.


  2. #2
    Registered
    Join Date
    Jan 2007
    Location
    USA
    Posts
    142
    Downloads
    0
    Uploads
    0

    Wink

    Joe, here is my latest project I just finished. I made this cribbage board for my dad he seems to have a hard time seeing the peg holes LOL. And he can keep everything in one spot.

    Rick

    Attached Thumbnails Attached Thumbnails Completed Work Pieces-40-jpg   Completed Work Pieces-41-jpg  


  3. #3
    www.joescnc.com joecnc2006's Avatar
    Join Date
    Aug 2004
    Location
    usa
    Posts
    3215
    Downloads
    2
    Uploads
    0

    Default

    That looks nice, the top just screws onto the bottom to make a nice enclosure.



  4. #4
    Registered
    Join Date
    Jan 2007
    Location
    USA
    Posts
    142
    Downloads
    0
    Uploads
    0

    Default

    [QUOTE=joe2000che;312947]That looks nice, the top just screws onto the bottom to make a nice enclosure.[/QUOTE


    Joe, yes that is right that way when you travel everything stays together.


    Rick



  5. #5
    Registered
    Join Date
    Sep 2006
    Location
    USA
    Posts
    480
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by rdhharm View Post
    Joe, here is my latest project I just finished. I made this cribbage board for my dad he seems to have a hard time seeing the peg holes LOL. And he can keep everything in one spot.

    Rick
    Very nice Rick!
    When you get a chance can you post details on what bits you used and how you finished the cribbage board. It's nice to see these work pieces and would be great to get a little detail on each one. Joe's work is very nice also and I've seen in his log details on how he did some of the work. It's great to learn something new or just pick up a tip or two!

    Thanks,
    Bob



  6. #6
    Registered
    Join Date
    Jan 2007
    Location
    USA
    Posts
    142
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by ccsparky View Post
    Very nice Rick!
    When you get a chance can you post details on what bits you used and how you finished the cribbage board. It's nice to see these work pieces and would be great to get a little detail on each one. Joe's work is very nice also and I've seen in his log details on how he did some of the work. It's great to learn something new or just pick up a tip or two!

    Thanks,
    Bob
    Thanks Bob I will post some details when I get a chance it will not be until this weekend though.

    Rick

    Last edited by rdhharm; 07-01-2007 at 08:21 AM.


  7. #7
    Registered
    Join Date
    Jan 2007
    Location
    USA
    Posts
    142
    Downloads
    0
    Uploads
    0


  8. #8
    Registered
    Join Date
    May 2006
    Location
    USA
    Posts
    954
    Downloads
    0
    Uploads
    0

    Default

    Been busy, but finally getting back to cnc. Joe's design is still running strong. Even despite problems I've had the machine is great and the work created with it is a result of hours of tinkering, making enough mistakes, teaching myself to program cad/cam all that, and joe's (and cnczone's) support for his design. Thanks for putting up with all my nagging in the past few months.

    This is just a sample, wish I shot pics of everything. Mostly for friends.





























  9. #9
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default

    The saw blade sign is cool. All the finish work looks good, too.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  10. #10
    Registered
    Join Date
    May 2006
    Location
    USA
    Posts
    954
    Downloads
    0
    Uploads
    0

    Default

    Thanks for the comments ger, I just started using the avery paint mask that Jay reccomended on the vectric forum. The stuff is great, and creates a flawless way to paint the signs especially with detailed lettering. The saw blade one was fun, one of my first cutouts on my router believe it or not. I traced a photo of a dewalt chop saw blade in autocad and I actually broke a 1/4" spiral cutting it out. You reccomended using 3/8" tooling so I could hunk that out as I had vibration problems and the 3/8" cutter cut that out flawlessly. I had little chatter marks on the teeth of the cutout and I didnt have to sand at all, I was suprised. First one was done for a co-worker, second was coincidentally another person, a memorial plaque for a fellow woodworker that past last year. The bottom is a Portuguese phrase, "good memories last forever."

    I hope more people post work; I think it's neat to see what people can come up with for joe's diy machine!



  11. #11
    Registered
    Join Date
    Sep 2006
    Location
    USA
    Posts
    480
    Downloads
    0
    Uploads
    0

    Default

    Brian,

    Great job! Those are some nice looking pieces!

    Thanks for sharing!

    Bob



  12. #12
    Registered
    Join Date
    Sep 2006
    Location
    United States
    Posts
    290
    Downloads
    1
    Uploads
    0

    Default

    Brian,

    Very Nice .GLad you shared them with us.

    Kent



  13. #13
    Registered
    Join Date
    May 2007
    Location
    Australia (Brisbane northside)
    Posts
    256
    Downloads
    0
    Uploads
    0

    Default

    Excellent work Brian. I'm getting very itchy, but very busy with my business and then my renovations so the Joes CNC is going to have to wait a little. Still squeezing in as much as I can when I can.

    Claudio



  14. #14
    Registered
    Join Date
    Aug 2005
    Location
    UK
    Posts
    597
    Downloads
    0
    Uploads
    0

    Default

    Hi Brian,

    Excellent projects and the finishing looks very professional - great work!

    As you say, using a paint mask really does take the hard work out of finishing carved pieces. But it still requires an 'artistic-eye' to make things look interesting and appealing!

    Tony



  15. #15
    Registered
    Join Date
    Nov 2006
    Location
    UNITED STATES
    Posts
    99
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by bp092 View Post
    Thanks for the comments ger, I just started using the avery paint mask that Jay reccomended on the vectric forum. The stuff is great, and creates a flawless way to paint the signs especially with detailed lettering. The saw blade one was fun, one of my first cutouts on my router believe it or not. I traced a photo of a dewalt chop saw blade in autocad and I actually broke a 1/4" spiral cutting it out. You reccomended using 3/8" tooling so I could hunk that out as I had vibration problems and the 3/8" cutter cut that out flawlessly. I had little chatter marks on the teeth of the cutout and I didnt have to sand at all, I was suprised. First one was done for a co-worker, second was coincidentally another person, a memorial plaque for a fellow woodworker that past last year. The bottom is a Portuguese phrase, "good memories last forever."

    I hope more people post work; I think it's neat to see what people can come up with for joe's diy machine!

    This paint mask May I ask what site did you order from

    Patrick



  16. #16
    Registered
    Join Date
    May 2006
    Location
    USA
    Posts
    954
    Downloads
    0
    Uploads
    0

    Default

    Tony, that's one of the hardest parts. Software, great tooling, industrial machines; they only go so far. You can do almost anything with a 3 axis router, but it is up to the programmer to get it cut efficiently, safely and when not for parts but for aesthetics such as signs much of it is the creativity of the programmer . Your program seems to make that quite simplified however..



  17. #17
    Registered
    Join Date
    May 2006
    Location
    USA
    Posts
    954
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by biotech1 View Post
    This paint mask May I ask what site did you order from

    Patrick
    White Paint Mask 1510 Unpunched

    http://www.beacongraphics.com/ (jay recommended it) I think it was around $28 for a roll shipped. I can get a lot of signs out of that one roll..



  18. #18
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default

    Quote Originally Posted by bp092 View Post
    White Paint Mask 1510 Unpunched

    http://www.beacongraphics.com/
    Look for A1828-S....easier to find. You won't see 1510 until it's in your cart.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  19. #19
    Registered
    Join Date
    May 2006
    Location
    USA
    Posts
    954
    Downloads
    0
    Uploads
    0

    Default

    Thanks ger, yeah I copied that from my paypal account sorry.



  20. #20
    Registered HayTay's Avatar
    Join Date
    Oct 2004
    Location
    United States
    Posts
    727
    Downloads
    0
    Uploads
    0

    Default

    This seems to be the actual Paint Mask page URL on Beacon Graphics:

    Paint Mask from Avery Graphics


    HTH,

    HayTay

    Don't be the one that stands in the way of your success!


Page 1 of 4 1234 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Completed Work Pieces

Completed Work Pieces