Yes, he is still around and his forum is active.
Not sure why you haven't gotten a reply.
I have been trying to get in contact with Joe for several weeks but with no response.
Is he still around and in business?
i am skeptical of purchasing his plans if I cannot even get him to reply to my inquiry.
is this delay in reply the norm or what?
i have read that most of the needed info to build Joes cnc comes from his forum but you must buy the plans first.
does anyone know the right e-mail for Joe?
Thanks
old engr
Yes, he is still around and his forum is active.
Not sure why you haven't gotten a reply.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I am having the same problem!
I sent an e-mail to Joe about a week ago but no response yet...
I am interested in building Joe's 2006 cnc and i have red almost every thread in here and aquired much info about the build.
I just do not know if there is some up to date info about the build in Joe's forum...
Try emailing him again. He said he's been very busy lately, and may have missed some emails.
I don't think there's much info on the 2006 on his forum, as it's mostly people building his Hybrid/Evolution machines.
There are a lot of 2006 build threads here, that should answer any questions you might have.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
That is what i thought too....
Thanks
Guys I recently joined Joes forum , and although I haven't spent a great deal of time there , I did read that he had a family member pass away .
Sorry if I'm wrong , but I'm pretty sure that's what I read . I had no issues joining prior to this incident, so I'm suspect he's just getting things back on track
I don't actually know anything about CNC router tables , but I stayed at a Holiday Inn Express last night