The holes are prob for lightening. Also, the kits are/were cut on a CNC so they were easy. If you are cutting by hand just omit them but make sure they are not a pass thru for a lead screw etc.
Dave
First off, I would like to thank Joe publicly for providing his 2006 R2 plans. I have been studying various videos and websites to either find an existing design for my first CNC build. This appears to be a good starting point. I plan to try to build this machine with a 4x4 cutting area.
I like the torsion box design but have been wondering the reason for the routed holes in the torsion framework. Why not just route the slots and keep the boards otherwise solid?
Also wondering, from DIYer's who have built the machine, how well does the black pipe work for the linear rails? I have seen at least one build use turned, hardened and ground rail stock in place of the pipe.
Thanks.
The holes are prob for lightening. Also, the kits are/were cut on a CNC so they were easy. If you are cutting by hand just omit them but make sure they are not a pass thru for a lead screw etc.
Dave
In the words of the Toolman--If you didn't make it yourself, it's not really yours!
Remember- done beats perfect every time!!
If you plan to build a 4x4 you should gret the plans for Joes 4x4 hybrid instead. MDF will sag if much longer than 3'. To build a 4x4 takes about 6'x6' of area. In my opinion building the Hybrid is the better course if you want a larger machine.
If you told me you planned to build a machine exactly as the plans show, then II would say the 2006 is a great choice. Once you start extending the table you are better off with a Hybrid.
Bill
Joescnc 4x4 R&P Router, Minimill, Minilathe, CNC Foamcutter, laser cutter, Vectric Aspire. http://makermasters.com, http://themakersguide.com
Thanks Bill. I would like to avoid using aluminum extrusions because of their high cost. I do have access to a CNC plasma cutter, so I am planning to utilize 1/8" steel sheet to cut some of the plates in wood and steel and then laminate for strength. Really, I'm just looking things over and working with elements of this design, as well as other designs to come up with a hybrid of my own that avoids aluminum extrusions.
Joe could I Please get a copy of the DWGS thanks kodyweaver94@yahoo.com
Hi Joe, could I also ask for a copy of the plans please? Sketch-up or Autocad (2006) would be great. Many thanks.
can i get a copy dwg
Hi can you send me the zip (AutoCAD) and thank you
Thank you for this.