remember to get a nice new blade for the table saw.
As for tools. A nice set of measuring tools. I use those the most, then a hand drill to do holes. I find the drill press I own too crappy for much of anything.
I used a bandsaw for the blocks, but actually did the sizing on a mill.
a good set of spade and hole saws.
also remember: some of the plans are labeled wrong size. Go by the picture, not stock size.
Also you can use woodscrews and save youself hours of drilling and tapping.
also some nice clamps. Every kind and as many as you can get. Also I used a nail gun for the torsion box and bed support.


LinkBack URL
About LinkBacks




