| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| JGRO Router Table Design For the discussion of JGRO designed router table. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-07-2005, 11:09 AM
| |||
| |||
| Spindle for JGRO I have got most of my router put together now... using the xylotex board and motors are 276 Oz. can anyone give me a good suggestion for a spindle.... I have been well informed that I will only be gettin about 30-40 ipm feed and that is ok... but what will I need to get a clean cut out of soft/hardwoods/plywood/mdf.... would a dremel be sufficient or maybe a laminate trimmer... should be my last piece to purchase so... I am thinking it could be a good christmas gift...    |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
