| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| JGRO Router Table Design For the discussion of JGRO designed router table. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-14-2005, 10:14 PM
| |||
| |||
Who has built or seen a JGRO style router over the normal size. I am looking build one but would like to make the cutting area x=48" y=36". Has anyone out there done this or something close? Would there be too much flex in the components for an accurate machine?    |
|
#2
10-14-2005, 10:40 PM
| ||||
| ||||
| CNC Darren built one with 60" pipes (and some design changes), not sure if he went wider: CNC Darren's worklog joe2000che built one similar to mine with a 26' x 45": Joes 2nd Machine Good Luck! jgro |
|
#4
02-06-2010, 12:16 PM
| |||
| | |||
| Hi all. First thanks for the drawings - very detailed, today I made the first peaces from MDF 19mm thick. Just I have very little knowledge in electronics like steper motors drivers and ..... Can I take into consideration your help??? |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
