JRGO Cut List


Results 1 to 8 of 8

Thread: JRGO Cut List

  1. #1
    Registered
    Join Date
    Feb 2006
    Location
    usa
    Posts
    8
    Downloads
    1
    Uploads
    0

    Default JRGO Cut List

    For those looking for a cut list for the JGRO MDF parts, the attached files work with cutlist32 from Delphiforfun.com

    http://www.delphiforfun.org/Programs/CutList.htm

    If you use the files, you should double check the dimensions, as I have not started cutting parts yet!

    Tony

    Similar Threads:
    Attached Files Attached Files


  2. #2
    Registered HayTay's Avatar
    Join Date
    Oct 2004
    Location
    NC
    Posts
    727
    Downloads
    0
    Uploads
    0

    Thumbs up

    Tony,

    Great 1st post. Thanks to the link to the CutList program. I downloaded it, ran it with both the 1/2" and 3/4" lists and have been generally playing with different size sheets for about 20 minutes now. All of the parts can be cut using 2 - 4'x4'x1/2" panels and 2 - 4'x4'x3/4" panels (allowing for minimal mistakes). While I can't haul a 4'x8' panel in my XTerra, I can definitely fit in the four panels listed above. This will also help out with a bathroom shelf project I'm contemplating.

    Thanks again for the lists and program link!

    HayTay

    Attached Thumbnails Attached Thumbnails JRGO Cut List-jgro-cutlist-1-2-png   JRGO Cut List-jgro-cutlist-3-4-png  
    Attached Files Attached Files
    Last edited by HayTay; 03-18-2006 at 10:10 PM. Reason: I'm a twit.


  3. #3
    Registered
    Join Date
    Nov 2004
    Location
    USA
    Posts
    126
    Downloads
    0
    Uploads
    0

    Default

    Thats a nice little app... wish I would have seen this before this weekend. Cut all my parts for my router Saturday. It's a modded JGRO design, all cut from one sheet with some scrap left, but I actually had to think. Since the supports in the original plans aren't true torsion boxes I opted not to do them.



  4. #4
    Registered
    Join Date
    Apr 2006
    Location
    USA
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default

    Quick ?, how do the files integrate into the program?



  5. #5
    Registered
    Join Date
    Nov 2004
    Location
    USA
    Posts
    126
    Downloads
    0
    Uploads
    0

    Default

    he probably changed the extension to txt to be able to upload them here

    make a test file in the program and save it out, then download his fiiles and change the extension to match the test files extension



  6. #6
    Registered
    Join Date
    Apr 2006
    Location
    USA
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default

    Ignore my previous ?, I wasn't paying attention when I opened the program. It LOADS .txt files Very nice piece of software.



  7. #7
    Registered
    Join Date
    Dec 2007
    Location
    usa
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default

    Hello all.

    If you decide to use this list, it does make it easier, but watch out for cutting bed top, base top, and the gantry front pieces. They came out wrong for me.

    The bed top, and base top were both 1.0" short, and I think the gantry front piece was .500 short length wise.

    Just double check with the actual prints before you start cutting, or be prepared to buy a second sheet of 3/4" MDF.

    Maybe I did something wrong, but just double check the figures first.



  8. #8
    Registered
    Join Date
    May 2009
    Location
    United States
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default

    What do the red pieces in the design mean? Are they excess parts or pieces that aren't correct? (I'm beginning my JGRO soon, but im having a friend cut the MDF so I'm trying to figure all this out for him.

    Thanks for all this though, its the greatest resource ever.
    daffelglass

    Last edited by daffelglass; 06-05-2009 at 11:13 PM. Reason: I dont know the difference between 'of' and 'or'


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

JRGO Cut List
JRGO Cut List