| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Jet Engines and Ram Jets Discuss home made Jet engines and Ram jet here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
09-26-2006, 05:10 AM
| |||
| |||
Does any one know what kind of taper an old Richmond ‘type 01’ mill vertical attachment has? It’s similar to a 30 INT but slightly bigger. The taper runs from 1.30 inches dia. to about 0.6 inches dia. and is 3.0 inches long. The drive pegs are 0.5 inches wide. Hopefully Andy  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
