turbine model

[da21]

here's a link to a model turbine , with drawings in Autocad & Catia
time to gcode it probably !

the site is in german , however it is easily followed to the specs and the download files section

anyone more knowledgeable

http://www.htl-steyr.ac.at/htlde/am/...rb2/index.html

[RotarySMP]

Thanks for the link. We sure didn't do anything this cool when I was at school.

[Crazycorkey]

I can't find it. Don't know if they have updated the website or what.
Could you email them to me?
cory_sda@yahoo.com
Thanks

[da21]

i have just emailed the autocad files to you


regards
Dave

[JerryFlyGuy]

Dave, do you think you could just post them up here as an attachment. I've looked at the site and I've not been able to locate them. I'm sure others are curious as well..

Thanks!
Jerry

[cncbasher]

here you go , these are for autocad , i have them for catia also however they are a large zip , so email or pm me if you require them .

i would appriciate any changes or amendments anyone implements
and i'll update the archive's for future use .


Dave

[cncbasher]

ok noticed the upload failed as it's over the allowed file size

[vulcom1]

Dave,
If it is no trouble I would like the files also. I am building the kj and it would be nice to compare as there are all sorts of mods now out. I am starting over as I now have a mill/drill along with my lathe. Just completed a couple of shafts.
My email address is on here somewhere. vulcom@telusplanet.net
Thanks in advance,
John

[GaryCorlew]

I would like the files also gcorlew@carolina.rr dot com
Thank you in advance!!

[cncbasher]

OK everyone , they are on their way

all i ask is if you make changes or additions let me have them
and i'll keep a up date for everyone on the list

hopfully in time , we may get a complete cnc build with the g code files etc , / simulation for everyone .

Dave

[cncbasher]

Dave,
If it is no trouble I would like the files also. I am building the kj and it would be nice to compare as there are all sorts of mods now out. I am starting over as I now have a mill/drill along with my lathe. Just completed a couple of shafts.
My email address is on here somewhere. vulcom@telusplanet.net
Thanks in advance,
John

yes i have built the KJ , use the 2039 compressor wheel , you will find a better thrust ratio , it's a little more expensive but worth it
the Schwitzer ( borg warner) part number is 53261232039

are you a member of the GTBA ?
http://www.gtba.co.uk


Dave

[vulcom1]

Dave,
Thought I would mention it here that I got your files. ((Much appreciatted))
I was a member of the GTBA but due to the changing around and going pay pal I never got it renewed. Herb used to offer it on this side of the pond but that changed also. I offered to take memberships for them but no return answer so I dropped it. It is still a good idea to belong and maybe will get back.
I have (2) 2038's that I purchased from Dieter in Switzerland and a 66mm turbine from Sarah at Wren. I am building a twin (CF100) 1/5th scale as a long going project.
Thanks, John