Results 1 to 11 of 11

Thread: selling kj-66 parts

  1. #1
    Registered
    Join Date
    Apr 2010
    Location
    usa
    Posts
    11
    Downloads
    0
    Uploads
    0

    selling kj-66 parts

    hello,
    we are one of the seller for kj-66 turbine engine parts.
    IF YOU ARE PLANNING TO BUILD A MICRO JET ENGINE YOU NEED THE ITEMS! THESE ARE SOMETHING YOU CANNOT BUILD YOURSELF AND ALL THE OTHER PEOPLE SELLING PLANS NEGLECT TO TELL YOU!
    we can help you and give you a cheaper price than the other website.
    you can find me in ebay as a seller named weleynew.


    our new website has just opened.
    please go the below address to check the KJ-66 items.

    http://www.wmmodel-ws.com


  2. #2
    Registered
    Join Date
    Apr 2010
    Location
    usa
    Posts
    11
    Downloads
    0
    Uploads
    0
    dear all,

    thank you for support us in ebay, later we will built another web site for you to buy the turbine item more convenient, i will also release our design plan for you guys in our website.
    if you have any installation or item questions about this please contact me: weley790310@gmail.com


  3. #3
    Registered
    Join Date
    Apr 2010
    Location
    usa
    Posts
    11
    Downloads
    0
    Uploads
    0

    dear all,

    dave,
    thank you very much for your kindly support, we the dimention problem of shaft tunnel has been fixed.
    thank you very much


  4. #4
    Registered
    Join Date
    Apr 2010
    Location
    usa
    Posts
    11
    Downloads
    0
    Uploads
    0
    hello, we have just import another item to this engine, the oil joint. please visit our website or ebay search kj 66.


  • #5
    Registered
    Join Date
    Apr 2010
    Location
    usa
    Posts
    11
    Downloads
    0
    Uploads
    0

    selling the complete of kj-66

    Dear buyers,
    Until now, we have finished the design and fabrication for all parts of kj-66 turbine engine.
    We are thankful for all the amature buyer who interest our items.
    Later we will release the electronic parts which need for this project, however we still need time to discuss with our cooperator to release us the ECU to us.
    please be patient for our new items.


    thank you very much!


    Weley
    WM-MODEL WS


  • #6
    Registered
    Join Date
    Apr 2010
    Location
    usa
    Posts
    11
    Downloads
    0
    Uploads
    0

    revised the combustor chamber

    dear all,
    we have just revised the combustor chamber, the detail photo will be upload to our website soon.
    thank you!


  • #7
    Registered
    Join Date
    Apr 2010
    Location
    usa
    Posts
    11
    Downloads
    0
    Uploads
    0

    hello,

    up up up up up


  • #8
    Registered
    Join Date
    Apr 2010
    Location
    usa
    Posts
    11
    Downloads
    0
    Uploads
    0
    upupupup


  • #9
    Registered
    Join Date
    Apr 2010
    Location
    usa
    Posts
    11
    Downloads
    0
    Uploads
    0
    dear all,
    recently, we have revised all the items for kj-66; please visit our website www.wmmodel-ws.net
    all the kj-66 items you need will be found at there.
    thank you!


  • #10
    Registered
    Join Date
    Apr 2010
    Location
    usa
    Posts
    11
    Downloads
    0
    Uploads
    0
    upupupup


  • #11
    Registered
    Join Date
    Apr 2010
    Location
    usa
    Posts
    11
    Downloads
    0
    Uploads
    0
    thank you very much!!!!


  • Similar Threads

    1. selling VM1
      By john whidden in forum HURCO
      Replies: 2
      Last Post: 03-16-2012, 12:21 PM
    2. SELLING OFF MY CNC PARTS FOR CHEAP ON EBAY!
      By losgetlost in forum EBAY ADS
      Replies: 2
      Last Post: 02-10-2010, 09:59 AM
    3. Selling Machinery
      By Swisha_House in forum General Metalwork Discussion
      Replies: 4
      Last Post: 11-26-2007, 05:59 AM
    4. Anyone in the UK selling a cnc router?
      By gigabiter in forum DIY CNC Router Table Machines
      Replies: 35
      Last Post: 12-09-2006, 12:03 PM

    Posting Permissions


     


    About CNCzone.com

      We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

    Follow us on

    Facebook Dribbble RSS Feed


    Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.