Made some progress
http://video.google.com/videoplay?do...arch&plindex=0
This is a link to a video of a turbo jet I designed in solidworks. When I go back to school I plan to make a model of the jet with a rapid prototyping machine. I am also thinking of making a working model of the jet in the machine shop at my school. I ordered a book on jet engines but I have not received the book yet so my design so far is based on very limited knowledge. It is in the first stages of design once I study the book I will finalize the design. I still have to design the flame box, and many other components. I limited the number of air foils because it will be difficult to manufacture large quantities of airfoils. Does any one think the airfoils should be closer together.
http://video.google.com/videoplay?do...arch&plindex=1
Similar Threads:
Made some progress
http://video.google.com/videoplay?do...arch&plindex=0
Hi
Have a look at some of the things these guys have done
www.rcdon.com/html/experimental_projects <<<<<<<<<<< awesome site www.rcdon.com you mite have to jion
www.nyethermodynamics.com <<<<<<<<<<<< awesome site
www.netpluscom.com/~10730/turbine
www.aardvark.co.nz/pjet/turbine4
www.gasturbine.pwp.blueyonder.co.uk/page1
www.aardvark.co.nz/pjet/spinning1
www.lockandsafe.co.uk/turbinepage
www.aardvark.co.nz/pjet/pjetboat
www.rmcybernetics.com/science/propulsion/jets
www.modelenginenews.org/index
www.cs.tut.fi/~kiiskils/turbo
I order a book about one month ago on jet engine construction but still have not received it. I do not know how the rest of the jet works so i am stuck for a while. I am going back to school next Thursday and i will make a plastic prototype of the airfoils in the STL machine. Can someone explain how the flame holder works so I can design one.
Made prototype models of my compressor and turbine blade design on STL machine.
http://s236.photobucket.com/albums/ff157/klaustigman/
I have the ability to machine the airfoils but I do not have the ability to engineer
the airfoils to make an effective jet. There are also many other aspects that I am not qualified to engineer. I also do not have the capabilities to machine a shaft within the tolerances needed. At such a high speed that the engine would
run at everything would have to be concentric and perfectly balanced for the engine to function properly. I am abandoning the project because it is beyond my capabilities. This is a project for a fully qualified engineer.
HAVE A LOOK AT SOME OF THESE PROJECTS PEOPLE HAVE DOCUMENTED FROM START TO FINISHED PRODUCT
home-built turbojet engine. The GR-1 is an experimental turbocharger jet engine
http://www.rcdon.com/html/gr-1_turbo...e_project.html
http://www.rcdon.com/html/gr-5_turbo...e_project.html
http://www.rcdon.com/html/gr-5a_turboshaft_engine.html
http://www.rcdon.com/html/grv-1_turbotug_project.html
http://www.rcdon.com/html/gr-7_turbo...e_project.html
http://www.rcdon.com/html/gr_engine_series_q_a.html
http://www.rcdon.com/html/readers_projects.html
http://www.rcdon.com/html/brian_sanburn.html
http://www.rcdon.com/html/jerry_listkowski.html
CHEERS
those are cool. any one use cnc machined turbine wheel
5 axis CNC Machining Center -JPM
jackpowermodel@gmail.com www.jackpowermodel.com