New Picture IH CNC TurnKey

[SMW Precision]

Pictured is complete IH CNC Mill currently shipping.

Options Shown;

• 2Hp VFD controlled Motor provides Spindle Speeds from 10 RPM to 3850RPM.
• Mill Table Extensions for a Y travel of over 12.5" with a X travel of 30.5" plus.
• Heavy Duty Stand and w/Keyboard Mount
• 4th Axis CNC Rotary Table with a 1056 once Stepper in 6 or 8 inch Versions
  

In picture is Tommie Spada.

[wildcat]

Looks really nice!

The spindle speeds listed go up to 3850. Is this top speed achieved by running the VFD past 60Hz or is the gear ratio in the newer mills a little different than the older ones?

Also, what is the box at the bottom of the column on the left side behind the table? Is it a oiler?

Oh, and what is the stuff on top of the head near where the spindle spline comes up? Looks like there is a hand wheel and other parts there. Is this a spindle lock?

[IHCNC]

Hi Wildcat;
Almost all of your questions can be answered on the IH Website. Thanks for the compliment it is very appreciated.