| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Industrial Hobbies (Support forum) Discuss Industrial Hobbies Milling machines and get direct support here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-02-2006, 06:03 PM
| |||
| |||
| Cog and Belt Drives for Stepper Motors This is a lame question but guessing someone out there has an extremely good answer. I'm wanting to build a fairly large CNC table designed similar to an old graph plotter where the X and Y are belt driven. It won't see much if any torque so it won't need any oversized belts, etc. but it does need to be accurate and fairly repeatable. Where are some good places to get cog wheels and matched belts that would have 24" - 36" of travel? I would connect these cog wheels to a stepper so any advice or pointers would be appreciated.     |
|
#2
11-02-2006, 06:06 PM
| ||||
| ||||
|
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
