INDEX GB65 CNC lathe

[igorko]

Hello Guys!

Is there anyone using INDEX GB65 (GB42, GB100) CNC lathe(s) here?

Or anyone familiar with these?

Would be grateful for reply.

Thanks in advance!

Sincerely, Igor

[meconer]

We have an old GE65. Not the same but a bit similar I think.

[HungryHorseMT]

We are currently using 3 GB65 machines with the index MBL bar loader

[phi_cnc]

Hi Everybody,

Anybody using INDEX GB65 CNC Lathe. I need help about that. Please contact me

Best Regards,
Jamil

[PRADEEP R.KHARE]

DEAR CO-BROTHER
PL.CONTACT INDEX WERKE GERMANY DIRECTLY FOR ALL YOUR PROBLEMS.
www.index-werke.de/ www.index-werke.de/de/englisch
Index-Werke GmbH & Co. KG Hahn & Tessky. ESSLINGEN GERMANY
Service Hotline INDEX
www.index-usa.com/
+49 (0) 711 3191-600

service@index-werke.de
THANKING YOU
PRADEEP R.KHARE
prkhare@hotmail.com
pradeeprkhare@gmail.com
0091 20 26991640 land line

[christian-gc]

Hello since Mèxico

I`m new in the forums, I write you because we have a new machine (old index GU600 lathe) but I have german information(operators manual). I was wondering if some body has english manual?

Before Hand
Thanks

[tgurbay]

Hi Everybody,

Anybody using INDEX GB65 CNC Lathe. I need help about that. Please contact me

Best Regards,
Jamil

hi i have a index 65 but i need parameters do you have ?

[tgurbay]

hi everybody
i am in trouble i have index gb 65 but it is not working now anybody have parameteres ?

[tgurbay]

hi igor
i have index gb 65 93 model but not working now i need parameters do you have ?

[tgurbay]

hi jamil
i am tarık i have index gb 65 but machine not work now i need parameters do you have ?

[igorko]

Hi!

I can send our parameters, but one should be careful with them, because they might differ quite much from machine to machine.

I would recommend to contact INDEX service with your machine serial number.
They are very helpful.

But if you like, you are welcome to specify what parameters you need and I will send a copy from our machine(s).

Sincerely, Igor

[tgurbay]

Hi!

I can send our parameters, but one should be careful with them, because they might differ quite much from machine to machine.

I would recommend to contact INDEX service with your machine serial number.
They are very helpful.

But if you like, you are welcome to specify what parameters you need and I will send a copy from our machine(s).

Sincerely, Igor

i send my machines serial number to index service but they couldnt turn back yet