I have a Traub TNS 60 with no parameters. I have the NC on and got most of the parameters back in but these are the ones that come in one of the service manuals and they are not complete and somehow generic because they work for many models and just change some according to the model. If someone has a machine like this or any similar and can help me by sending me parameters will be most apprecciated.
Alarms 005 memory parity error and A062 FMS not ready are showing
I already got the parameters inside thru the parameter tape reader, and I do not get any errors at the time to turn everything on. I can send it home and I can open/close the chuck, but BUT the acknoledge led for the chuck does not light. This machine was originally without a power chuck, so I am assuming one of the flags on CHECK page number 7 or 8 has to change. I have the manual but it does no make any sense to me now
#41 F1 (30 80)
#42 F2 (00 08)
#43 F3 (00 00)
#44 F4 (00 00)
Number 30 do not make any sense because it does not appear in the manual in the first place.
Any ideas? I am so close to get this thing working again.
Or something like that, I am not near the machine so I do not have the accurate numbers, but It does have a gear transmission, part sorter, 12 station turret, tailstock.