Need Help!- SUPER CHARGED V-8

[XC700RMK]

Hoping some one can help me out, I am insearch of prints or plans for a super charged v-8.

At one time, before get married and having kids, I started building a challenger v-8, after the arrival of the kids I put everything on hold. now that my kids are older now I would like to pick up where I left off, but unfortunately all my Prints are missing, I still have my parts i built but have no prints. there is a ton more of information out there now compared to when I started my project, So I am hoping some can help.

I am not intrested in trying to make a buck, I would just like to build one for myself.


Thanks
Brent

[dynosor]

Hope someone helps you directly, meanwhile browse these sites:

http://www.nvbackflow.com/engines/links.htm

http://www.homemodelenginemachinist....a209&board=2.0

[stevehuckss396]

I think Coles power Model still has the challenger plans and castings for sale. I just tried there web site but it was down. Might just be temperary.

I think Ken Hurst at nvbackflow.com had a casting kit to convert the challenger to over head valve. Not sure if the castings are still available.

Hope this helps!

Steve

[dynosor]

Originally Posted by stevehuckss396 . Not sure if the castings are still available.

Castings at: http://www.nvbackflow.com/engines/Blocks.htm

[jones]

Not sure if it's any help, but I have plans for a miniature V8 OHV designed by Roy Amsbury. It is on one of the following sites:
http://members.optusnet.com.au/barberdeb/
http://members.optusnet.com.au/barbercaz/

I forget which, but there are other designs there which I have come across on the internet if anyone is interested.