Need Help!- 302 cyl Head Blueprint

[Henderlong]

I need a print for a 302 cyl head. the casting numbers are D08E. But any print for a 302 will be benificial. I really just need the exhaust port face, with all hole locations.
Thanks,
Dave Henderlong

[stevehuckss396]

Originally Posted by Henderlong I need a print for a 302 cyl head. the casting numbers are D08E. But any print for a 302 will be benificial. I really just need the exhaust port face, with all hole locations. Thanks, Dave Henderlong

Try George Britnell (GBritnell) over at the Home Model Engine Machinest web site. He did a 1/4 scale 302 from real prints.

[Henderlong]

Thanks, i sent him an email. Hopfuly it will turn out eh?