SKT21LM Tailstock alignment

[CNC RACING]

I collided (a soft collision) my threading tool with my tailstock live center.

I checked the turret alignment(it's ok), checked for taper machining(it's ok) and finally I checked the ''main spindle - tailstock alignment (that is not ok)

I read the ''installation and maintenance instruction manual'' and the procedure to align the tailstock is not very clear. I guess the Korean to English translation isn't good. Though I'm bilingual, I don't understand the instructions... even the French ones !

Can anyone help me ?

Similar Threads:

• ZL250 tailstock alignment
• Okuma LB15 tailstock alignment
• Tailstock Alignment Question
• tailstock (mis)alignment
• Q: Mini lathe Tailstock Alignment?

[CNC RACING]

Hey juste to let you know guys that I got it.

I took the whole day to align my tailstock (That was the first time for me doing this.)

I did it myself because I'm the only one at the shop to have knowledge in the cnc machines. And there are no mechanics in the area where I work (North of Quebec) So we have to do the repairs ourselves.

[PinMan]

I guess the Korean to English translation isn't good.

We also have an SKT21LM, The translation is extremely bad. Glad you got it figured out.