- Hyundai Kia SKT20 LMS fanuc 0i
-
Member
Hyundai Kia SKT20 LMS fanuc 0i
cant get the sub spindle locking pin to disengage, tryed M117 still cant get it to spin (G97S500M113), I can M116 and it will rotate and then lock again, I must be missing another M code? any help would be great. thanks
Similar Threads:
-
-
Member
Re: Hyundai Kia SKT20 LMS fanuc 0i
Just for Future info
SKT15/21LMS / Ref. data for 5deg. Index
1. M-code
M116 : Sub spindle orientation (same as M300 position)
M117 : Cancel of M116
M120 : Sub spindle lock pin “In”
M121 : Sub spindle lock pin “Out”.
M300 : Sub spindle index to “0” deg.
M305 : Sub spindle index to “5” deg.
M310 : Sub spindle index to “10” deg.
~
M655 : Sub spindle index to “355” deg.
2. Sample program / without turret index
M110 ----- Select sub spindle
M116(or M300) ----- Sub spindle orientation (“0” deg)
M117 ----- Cancel of M116 (Pin “In”)
M111 ----- Select mill spindle for machining
(Machining)
M110 ----- Select sub spindle
M121 ----- Pin out
G04 U0.5 ----- Dwell 0.5 sec.
M390 ----- Index to 90 deg.
M117 ----- Cancel of M116 (Pin “In”)
M111
(Machining)
- Hyundai Kia SKT20 LMS fanuc 0i
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules