- KIA VX750M
-
Registered
KIA VX750M
We have a kia vx750m and are getting an alarm code #2063 which says arm not up, this is happening during a program run and has also done it during manual tool changes, the tool change arm stops at the tool head,
any ideas ? I'm new to the maint. dept. so any help would be appreciated
Last edited by CAV; 09-08-2016 at 04:40 PM.
-
-
Registered
Re: KIA VX750M
I should have also mentioned this is happening when the arm is up at the spindle during the tool change
-
Member
Re: KIA VX750M
there should be 4 Limit switches (Sensors) infront of the cam box.
i guess left one is for the brake and the 3rd one is homeposition.
maybe the 3rd one is broken or the signal wheel is moved?!
- KIA VX750M
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules